{"id":6899,"date":"2019-09-30T12:15:37","date_gmt":"2019-09-30T17:15:37","guid":{"rendered":"https:\/\/www.berger.ca\/en\/?p=6899"},"modified":"2025-04-01T16:32:43","modified_gmt":"2025-04-01T21:32:43","slug":"optimizing-yield-and-potting-practices","status":"publish","type":"post","link":"https:\/\/www.berger.ca\/en\/grower-resources\/hints-and-tips\/optimizing-yield-and-potting-practices\/","title":{"rendered":"Optimizing Yield and Potting Practices"},"content":{"rendered":"

Optimizing Yield and Potting Practices<\/h2>\n

By Pierre-Marc de Champlain, Director \u2013 Technical Services<\/em><\/p>\n

Berger adjusts the chemical and physical characteristics of its growing media to match grower needs. However, it is the grower\u2019s responsibility to manage the structure of the growing media in the containers. Proper handling before, during and after potting is critical for optimizing the root environment.<\/p>\n

Advice no<\/sup>1<\/span><\/h4>\n

Storage<\/h3>\n

Bags or bales should be stored in a cool area out of direct sunlight as much as possible. If the material is stored for long periods (> 4 months), the wettability of the growing media should be verified before use.<\/p>\n

Advice no<\/sup>2<\/span><\/h4>\n

Growing Media Handling<\/h3>\n

When handling, the goal is to prevent damage to the growing media as much as possible. Fluffing and potting equipment should be selected and adjusted with care.<\/p>\n

<\/p>\n

Advice no<\/sup>3<\/span><\/h4>\n

Avoid Compaction<\/h3>\n

<\/p>\n

Growers should avoid compacting their growing media at all costs. Compaction reduces air space and increases water retention. Each action affects the physical structure of the growing media in its containers. The height of the brush needs to be properly adjusted for each type of container. Excessive vibrations on the conveyor can compact the growing media in the container. An automatic dibbler can significantly compress the growing media if it isn\u2019t adjusted properly. The height from which the growing media falls into the container has a direct impact on porosity.
\n<\/div><\/p>\n

<\/p>\n\n\n\n\n\n\n
Action<\/em><\/td>\nCompaction<\/em><\/td>\nAir Space*<\/em><\/td>\n<\/tr>\n
Fill & Brush<\/td>\nLight<\/td>\n18%<\/td>\n<\/tr>\n
Double-tap (or ex-cessive vibration)<\/td>\nMedium<\/td>\n13%<\/td>\n<\/tr>\n
Hard pack (or high drop into container)<\/td>\nHeavy<\/td>\n10%<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Approximate values.<\/p>\n

<\/div>
\n<\/div>\n


\n
<\/p>\n

Nesting stacks of pre-filled containers and trays will increase compaction and create inconsistencies.<\/strong>
\n<\/div><\/p>\n

<\/p>\n

This can be avoided by offsetting trays or using rigid sheets between rows of containers.<\/strong>
\n<\/div><\/p>\n

<\/div>\n


\n

\n\"Avoid
\n<\/div><\/p>\n


\n\"\"
\n<\/div><\/p>\n

<\/div>\n

Advice no<\/sup>4<\/span><\/h4>\n

Adjusting the Water Content<\/h3>\n

Berger sells growing media, not water. We keep the water content of our mixes as low as possible to maximize the number of skids per truckload.
\nAn additional 5% in water content represents roughly 2000 lbs. on a full truckload, which is approximately the weight of one full skid.
\nBerger has the smallest water content range in the industry: approximately \u00bd gallon per cubic foot of growing media. This makes it easier to adjust the water content prior to potting. Most Berger products have an initial water content of 43 to 46%, while the water content of our competitors\u2019 products can be as low as 35% and as high as 75%.<\/p>\n

There are many advantages to adjusting the water content before potting:<\/strong><\/p>\n